Canon G2000 Adjustment Program

The imagePROGRAF iPF6400, 24-inch large format printer was designed for professionals in the graphic, fine art, photography and proofing markets that seek the highest possible standards for quality-control and image reproduction. An incredibly large color spectrum is produced by the 12-Color LUCIA EX pigment ink set, which also provides better scratch resistance and smoother gradations. The new Multi-sensor included with this printer provides improved color density detection and allows for a full calibration to be completed within 15 minutes, with the ability to use non-Canon branded media. A new Color Calibration Management System allows for color calibration targets to be created using the iPF6450 with optional spectrophotometer and shared across all new iPFX400 12-color printers, and the included software allows for all printers on the network to be monitored from one central location. The printer supports ink tank sizes of 130ml and for the first time, 300ml, and the new sub-ink tank keeps some ink in reserve to allow for tanks to be changed without interrupting a print. In highest print mode, the order of ink application and layering is optimized to maintain the highest print quality with fewer passes, making this mode twice as fast compared to previous models.

Occasionally, some users will experience the error on their printer where it stops printing and all the lights start flashing. Different printer models may have different descriptions of this error, but it seems to be generally described as a ‘Unknown Printer Error’. In fact, numerous users in the internet community believe that this error is most often experienced when the printer has reached a condition where it thinks the ink waste pads inside the printer are full. That’s right - all that ink you lose in cleaning cycles and priming new cartridges has to go somewhere, and your Epson printer keeps track of roughly how much ink it has dumped into some large absorbent pads in the base of the printer!

Technically, this condition requires an Canon service engineer to resolve. Update mac os mountain lion to el capitan. It is however, possible that you could fix it yourself by resetting the printer and clearing the counter of how much ink has gone to those pads. You can do this as follows: (this seems to work on numerous Epson desktop printers, but we make no claims about it’s reliability on your printer. Use at own risk etc!) However, we now have three separate procedures supplied by various users; it seems that there are either different reset procedures depending upon printer model, or something else is going on that we do no understand!

Canon G2000 Adjustment Program

Some Canon user found some problem on Canon Pixma MP198, the Problem is How To Reset Canon Pix MP198 or They try to find some Resetter.

Canon ST4905 / G1000 G2000 G3000 Resetter First need to test service mode and then buy this service tool If can't access service mode with 5step. Apple install el capitan. Because your printer have been hardware problem.

  • Canon G1000, G2000, G3000 Adjustment Program ( Resetter ) Printer Software October 05, 2020 0 Comments Download Link Canon G1000, G2000, G3000 Adjustment Program ( Resetter ).
  • We provide It Solutions and Security Systems, We have Computer servicing, Toner Refilling, Laptop Service, Printer Service, Cctv Installation.
  • New WIC Reset Utility Version V5.0.10 support all Canon G series models: Canon G1000, G1100, G1400, G1900. Canon G2000, G2100, G2400, G2900. Canon G3000, G3100, G3400.

Reset Waste Ink:

  1. Enter SERVICE MODE. By pressing Menu Copy Scan Copy Copy
  2. Select TEST MODE.
  3. Select [8] PRINTER TEST in TEST MODE.
  4. Select 3. [EEPROM CLEAR].
  5. Select 0. [INK COUNT].
  6. Press the [Set] key.
  7. Press the [Stop/Reset] key (returning to the state of 3)), and then press the [ON/OFF] key.
Hope that tip is useful!

Here the reset procedure to reset waste ink counter on Canon Pixma MP145 and MP160 :

  1. With the printer powered off but connected to a power source, press the Power button while pressing and holding the Stop/ Reset button.
  2. When the Power is lit, press the Stop/Reset button two times while pressing and holding the Power button.
  3. When releasing the Power button and the Stop / Reset button (regardless of order), the printer will move into a service mode. (Waiting for menu selection).
  4. When the on/off lights in green, press the Stop/Reset button the specified number of time(s) according to the function listed in the table below.(Each time the Stop/Reset button is pressed, the LED lights alternately inorange and green, starting with orange.)note: press 4 times for waste ink counter reset.
  5. Unplug cable power from a power source.

Reset Waste INk Canon iX4000, iX5000

Epson Adjustment Program

  1. Connect the Canon PIXMA iX5000 or iX4000 printer to the power cord. ( note : If the automatic power-on function is enabled in the printer, the printer enters the service mode for the first time, but it will never enter the service mode if the printer is turned off by the Power button. This is because the printer remains to be turned on internally if the power is turned off by the Power button. To prevent this, disconnection of the power cord is required before starting the printer in the service mode ).
  2. With the Canon PIXMA iX5000 or iX4000 printer powered off, while pressing the Resume/Cancel button, press and hold the Power button. (note : Don’t release the buttons. The Power LED lights in green to indicate that a function is selectable.)
  3. While holding the Power button, release Resume/Cancel button. (Don’t release the Power button.)
  4. While holding the Power button, press Resume/Cancel button 2 times, and then release both the Power and Resume/Cancel buttons.
  5. When the Power LED lights in green, press the Resume/Cancel button 4 times to reset waste ink counter in the Canon Pixma iX5000 / iX4000. (note : If the Power LED does not light in green the printer does not enter the service mode, disconnect the power cord and plug it again. Then start from step 1 to start the printer in the service mode again).
  6. At the end of the service mode, press the Power button. The paper lifting plate of the sheet feed unit will be raised.